Menu Content/Inhalt
DYNAFIL C PDF Print E-mail

Dynamic thermal stress tester for draw-, crimp- and shrinkage-force testing

DYNAFIL C
DYNAFIL C
Based on the preceding DYNAFIL M model, the DYNAFIL C incorporates the well-proven two-stepped godet technology, enabling arbitrary extension settings between -50 and +400 % through exchanging the godet rolls. For the most important application areas of crimp-force testing on textured yarns, draw-force measurement on pre-oriented yarns and shrinkage-force examinations, only few length variation steps are usually required, i.e. -5% (textured yarn), 0% (flat yarn) and 60% (Polyester POY) or 30% (Nylon POY).

Further important technical characteristics of the DYNAFIL C are:

  • Godet drive up to 500 m/min
  • Convection heater with a temperature range up to 300 °C
  • Load cell with measuring ranges 20, 100 and 1000 cN
  • Feedwheel pre-tensioning device

As applicable to the sister DYNAFIL ME model, the DYNAFIL C is equipped with a PC system for controlling the test processes and for the evaluation of the measured data.

It is also possible to add the automatic package changers Type SE or SM or to carry out friction measurements.

Further technical data:

Mains supply:

220 V, 50 (60) Hz, current requirement approx. 6A

Compressed air supply:
5 bar, 150 l/min
Dimensions:
Height 1680 mm, width 850 mm, depth 710 mm, weight approx. 160 kg 
 
 
Next >
[ Back ]